dry type magnetic separator

The raw ore of 0.55mm is sent into the upper hopper, and the material output can be adjusted by the hand wheel after the vibration motor vibrates the cloth. The magnetic roller is driven by the speed regulating motor, and the speed of the speed is adjusted by the speed regulating meter, which can control the output of the magnetic separator and the iron content of the concentrate. The ore particles are sent to PTMS magnetic separator by conveyor belt for sorting. Since the ore particles of iron ore are magnetic, they are immediately adsorbed on the magnetic roller by strong magnetic field.

PTMS magnetic separation

Since potassium albite is not magnetic (magnetic is very weak), the strong magnetic roller does not produce suction on it, with the rotation of the magnetic roller, the ore particles have been attracted to the magnetic roller, and the potassium albite is thrown out in front of the separator when the magnetic roller turns to the front position (by changing the size of the Angle of the separator can adjust the grade of the concentrate). Ore particles continue to be carried to the demagnetization area by the PTMS magnetic separator roller and automatically fall into a separator and collect as finished concentrate.

what is magnetic separation method in hindi？

Because the gangue dropped by the upper magnetic roller still contains some ore particles with weaker magnetic properties, they will enter the lower magnetic roller to continue magnetic separation. The finished ore particles after magnetic separation enter the binary ore bucket to collect as finished products, and the thrown gangue is discharged through the tailings port, so that the PTMS magnetic separator process ends.
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com