Magnetic magnetic separator

The round drum consists of approximately 3 mm stainless steel coil welded into a cylinder, the end cap is cast aluminum parts or components, and the cylinder is connected by leather screws. The motor uses the aluminum alloy micro worm or the variable motor at once to pick up the circular drum, magnetic roller and brush roller for rotation exercise, which is the energy-saving PTMS magnetic separator.

PTMS magnetic separation

 
PTMS magnetic separator is mainly composed of round drum, barrel roller, magnetic brush roller, magnetic system, silo and transmission material. The magnetic system is an open magnetic system, mounted in a circular cylinder and exposed to all magnetic. The square magnetic block is bolted on the bottom of the magnetic yoke with a leather nut. The shaft of the magnetic yoke extends out of the cylinder and the shaft end is fixed with a crank arm.

what is magnetic separation in Kaolin？

 
Hard turning the arm can improve the bevel Angle of the magnetic system, improve the tight fitting and external rod fixing. The process modification area of the silo is customized with stainless steel, and the remaining material of the equipment frame and silo is fused with most hardware. Advantages of PTMS magnetic separator: The preliminary separation of lean iron ore after coarse crushing or medium crushing, the removal of tailings ore and other waste rock, improve the ore content, and reduce the pressure of the joint step.
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com