magnetic equipment

Removing iron from minerals by flotation PTMS MAGNETIC SEPARATOR can achieve better results than other methods. Because it can not only remove iron minerals, but also remove timely particles with iron films and clay minerals. Therefore, flotation method is adopted in many foreign quartz sand concentrators. To remove heavy minerals containing iron, flotation is relatively simple. The common collector for iron oxide is sodium petroleum sulfonate. Petroleum sulfonates can also be replaced by fatty acids.

PTMS magnetic separation

 
In order to remove iron impurities, it is necessary to further reduce the particle size of quartz sand to a monomer dissociation state. Therefore, the adaptability of flotation PTMS MAGNETIC SEPARATOR to coarse particles is poor, while the particle size range of quartz sand is relatively coarse. In addition, special consideration should be given to the pollution of flotation agents to the surrounding environment.

what is magnetic separation process？

 
Agitation scrubbing is done by the friction between particles caused by the vigorous agitation of the blade and is used for PTMS MAGNETIC SEPARATOR. This method usually removes clay minerals and some loose oxides that stick to the surface in time. However, since iron oxide films are thin and strong, this method is unlikely to remove them. Chemical reagents can be added if necessary.
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com