Welcome to Foshan Powtech Technology Company Limited!https://www.powtechina.com
Ultrasonic PTMS MAGNETIC SEPARATOR flotation method has low cost and good effect
published date: 2023/12/27

magnetic separator price

PTMS MAGNETIC SEPARATOR Compared with mechanical scrubbing, this method can not only eliminate the impurities on the surface of the mineral, but also remove the impurities at the particle cleavage gap, so the iron removal effect is better. Ultrasonic iron removal for silica sand such a cheap resource, it is still relatively expensive, and it is still difficult to apply in large concentrator, but it is possible for those requiring high purity and low consumption in the production field.

PTMS magnetic separation


PTMS MAGNETIC SEPARATOR flotation method is mainly used to separate feldspar in quartz sand, and can also be used to remove clay minerals such as mica and secondary pig iron in quartz sand. The most typical process is hydrofluoric acid as the activator, under strong acidity (pH? 2 ~ 3) Flotation with amine cationic collector.

what is magnetic separation in Feldspar?

 
In iron flotation, NaOH can be used to inhibit quartz activated by metal ions. When flotation clay minerals such as feldspar and mica, H2SO4 can not only produce localization adsorption on the surface of feldspar, reduce the surface negative termism, but also activate feldspar and mica. The process of iron removal by PTMS MAGNETIC SEPARATOR is simple, low cost and good effect. This process has played a positive role in expanding the utilization range of quartz sand resources.
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com

PTMS magnetic separation FELDSPAR 20231227832

Share to:

Powtech Machinery Company produce magnetic separator, Industrial Magnetic Separators, Industrial magnetic separation equipments,Magnetic Equipment,Permanent Suspension Magnet,Vibrating Equipment