wet separator

Physical PTMS magnetic separation methods mainly include scrubbing, gravity separation, flotation, ultrasonic dressing, magnetic separation and water washing, etc. These methods mainly deal with coarse impurities. At present, the main scrubbing is stirring scrubbing and rod scrubbing. Stirring scrubbing mainly relies on the blade to stir vigorously to cause friction between particles.

PTMS magnetic separation

The main factors affecting the scrubbing effect are the structure and configuration of the mixing equipment and the scrubbing concentration and scrubbing time in the process. Because there are too many influencing factors, and at the same time, the strong abrasive property of the sand puts forward high requirements on the wear resistance of the equipment. Therefore, the purification effect of PTMS magnetic separation scrubbing is not ideal.

what is magnetic separation process？

However, compared with stirring scrubbing, PTMS magnetic separation rod friction washing can not only remove impurities on the surface of quartz sand, but also remove impurities at uneven places and small gaps, almost twice as much as stirring scrubbing, but the film iron on the surface of quartz sand is difficult to remove, so it is only a method of pretreatment of quartz sand.
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com