The PTMS Electromagnetic Separator is purified by the combination of physical method and chemical method
Silica Sand Processing Line
However, the strong magnetic mineral content in quartz sand is very small, and almost no placer can use a weak magnetic machine to reduce the iron content, so the main PTMS Electromagnetic Separator suitable for quartz sand beneficiation. The particle size of quartz sand is mainly distributed between -60+180 mesh, accounting for 82.33%, the content of SiO2 is relatively high (greater than 99%), the content of impurities is relatively low, and the content of Fe2O3 is less than 0.01%.
PTMS magnetic separation
The quartz sand with particle size greater than 60 accounts for 7.05% of the total, and the quartz sand with particle size less than 180 accounts for 11.62% of the total. The SiO2 content in these two types of quartz sand with larger and smaller particle size is relatively low (less than 99%), and the impurity content is relatively high, among which the Fe2O3 content is higher than 0.01%. In quartz sand, -80+100 target particles accounted for 27.92%. PTMS Electromagnetic Separator removes iron (FE2O3) from it.
what is magnetic separation?
The distribution rate of Fe2O3 in +50 mesh and -80+100 mesh quartz sand is the highest, which is 19.71% and 22.23%, respectively. In practice, it is rare to use only one method alone to produce qualified quartz sand. It is often a combination of physical and chemical methods to achieve PTMS Electromagnetic Separator purification standards.
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com
