PTMS magnetic separation pulping device and magnetic separation device for iron removal of ore quartz sand
electromagnetic separator
The utility model relates to a PTMS magnetic separation device for iron removal of ore quartz sand, which comprises a pulp discharge device and a magnetic separation device, and the pulp discharge device is located above the magnetic separation device; The pulp discharge device comprises a pulp storage barrel, the bottom of which is provided with a pulp discharge port, the pulp discharge port is provided with an adjustable opening size of the pulp discharge valve, the pulp storage barrel is provided with a floating adjustment mechanism connected with the pulp discharge valve,
PTMS magnetic separation
The floating regulating mechanism is equipped with PTMS magnetic separation floating regulating mechanism to drive the opening degree of the discharge valve to increase gradually when the level of the slurry in the slurry storage barrel is gradually reduced. The upper end of the valve stem is arranged at an interval with a vertical thread rod, which is connected with the mounting support thread, and the upper end of the thread rod is provided with a handwheel. The edge of the center hole and the edge of the outer torus of the first disk body are provided with a protection plate extending downward.
how to separate two magnets?
The bottom surface of the barrel body is inclined, and the discharge port is arranged on the low side of the bottom surface. The PTMS magnetic separation device uses the dual separation method of magnetic absorption and centrifugation to fully separate the pulp and iron, and the slurry can fully contact the disk surface to ensure the full absorption of iron, and the centrifugal force subjected to the slurry can fully separate the slurry and iron, and the separation of iron and slurry is more thorough.
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com
