feldspar processing

At the beginning of feeding, first turn the handwheel to separate the threaded rod from the valve stem. At this time, the valve stem is lifted upward under the action of the pressure spring. At the same time, because the buoyancy of the float is large at this time, the lifting height of the PTMS magnetic separation valve stem is small, and as the liquid level of the slurry drops, the buoyancy of the float gradually decreases. The stem will slowly lift under the action of the pressure spring,

PTMS magnetic separation

 
Then the opening degree of the spool gradually increases. The slurry discharge valve also includes a valve shell. The bottom of the slurry storage barrel is funnel-shaped, and the slurry discharge port is a tubular structure vertically arranged at the bottom of the PTMS magnetic separation slurry storage barrel. The valve shell and valve core are coaxial with the slurry discharge port, and the valve shell is arranged at an interval between the upper end of the slurry discharge port and the vertical direction.

what is magnetic separation in science ？

 
The spool sliding is arranged between the valve shell and the discharge port; The upper end of the valve shell is connected with a vertical conduit, the valve stem is arranged through the vertical conduit, and the upper end of the vertical conduit is firmly connected with the installation bracket fixed in the slurry storage barrel; The lower end of the spool is provided with a connecting column, and the lower end of the connecting PTMS magnetic separation column is provided with a conical slurry guide cover. The slurry guide cover is used to disperse the slurry discharged from the slurry outlet into a ring.
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com