feldspar processing

wet beneficiation of quartz In the process, the burned quartz particles are quickly placed in hot water at room temperature to cool down, dissolve the soluble substances generated by roasting, and heat the water for 0.5-2 hours to increase the solubility of the soluble substances in the water. Flotation agent was added to the quartz sand powder after water, and impurities with specific gravity less than 1 were removed by PTMS magnetic separation.

PTMS magnetic separator

PTMS magnetic separation Mainly remove non-magnetic impurities, such as: feldspar, pure white ite, etc.wet beneficiation of quartz Process with deionized water to wash the residual flotation agent and quartz sand surface impurities; first the quartz sand washed by deionized water to air drying (drying) to remove a large amount of water, and then dry in the special drying equipment, and heat to 100℃ -200℃; add the dried quartz sand to the immersion tank,

what is magnetic bead separation？

Under the condition of drying and high temperature to add acid (sulfuric acid (sulfuric acid, hydrochloric acid or hydrofluoric acid), the acid concentration is 5% -20%, constant temperature stirring at 30℃ -100℃ for 2-24 hours, PTMS magnetic separation to remove trace metallic and non-metallic impurities in quartz sand powder; acid immersion is one of the important processes in the wet beneficiation of quartz process,
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com