Welcome to Foshan Powtech Technology Company Limited!https://www.powtechina.com
Dry process PTMS magnetic separation process processing with low production cost is commonly used in industrial filler
published date: 2024/6/17

high gradient magnetic separation

Dry method PTMS magnetic separation is generally the extracted raw ore after the crusher broken to about 25mm, to the cage crusher, so that the particle size is reduced to about 6mm. The hot air blown into the cage crusher reduces the moisture of the kaolin from about 20% when picked to about 10%. The crushed ore is further ground by blowing Raymond mill equipped with centrifugal separator and cyclone dust collector.

PTMS magnetic separation


PTMS magnetic separation The process can remove most of the sand and stone, suitable for processing those raw ore white, low sand content, suitable particle size distribution. Dry processing production cost is low, the products are usually used in rubber, plastic and paper making and other industrial fillers. The wet processing process includes several stages of sludge dispersion, classification, impurity sorting and product treatment.

what is magnetic separation in chemistry?


Dry method PTMS magnetic separation general principles of the process: raw ore crushing pulp and sand sand spinning grade stripping centrifuge grading magnetic separation (or bleaching) concentrated pressure filter drying ceramic grade or paper coating grade products.
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com

CHINA CLAY PTMS magnetic separation 20240617

Share to:

Powtech Machinery Company produce magnetic separator, Industrial Magnetic Separators, Industrial magnetic separation equipments,Magnetic Equipment,Permanent Suspension Magnet,Vibrating Equipment