magnetic separation equipment

The difference between the design of PTMS magnetic separation except the iron process is that the vertical pipe has a tapping device for tapping the filter cloth. The tapping device includes a spring fixed to the outer wall of the lower transverse pipe, the one end of the spring is inserted to the outer wall of the lower transverse pipe, the other end is suspended and this end extends towards the direction of the filter cloth.

PTMS magnetic separation

 
The lower transverse pipe extends near one end of the vertical pipe to the other end of the lower transverse pipe, and the extension end is connected with the clean water pipe, which is a continuous pipe with clear water. In the actual PTMS magnetic separation kaolin production, the lower transverse pipe away from the water pipe one end and the hydrocyclone connected. The shaft is far away from the peripheral wall of the upper transverse pipe with a mounting hole, and the shaft peripheral wall is located outside the mounting hole and equipped with a filter cloth covering the mounting hole,

what is magnetic separation process？

The filter cloth is clamped on the vertical pipe through the clip, and the filter cloth can be removed by opening the clip. The flocculant will pass through the upper horizontal pipe, the vertical pipe, the vertical pipe and the lower horizontal pipe successively. In this process, the flocculant will be filtered by the filter cloth, and the flocculant flowing into the lower horizontal tube will be transported to the PTMS magnetic separation hydrocyclone along with the water in the water tube.
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com