Welcome to Foshan Powtech Technology Company Limited!https://www.powtechina.com
PTMS magnetic separation Iron removal process for selective dispersed flocculation
published date: 2024/7/1

Magnetic separator equipment

The old magnetic separation method is a method of mineral magnetic separation, which is a traditional method to remove iron. The effect of the magnetic separation of kaolin is not ideal. Selective flocculation method: selective dispersion-flocculation PTMS magnetic separation iron removal process to remove fine iron impurities in kaolin, which can reduce the Fe2O3 content of kaolin from about 1.83% to 1.13%, and the iron removal rate is 33.99%.

PTMS magnetic separation


The kaolin first by tamping, three-stage cyclone classification, horizontal screw grading, high gradient PTMS magnetic separation, chemical bleaching, surface activation treatment, centrifugal dehydration, pressure filter dehydration, ultrafine grinding, drying, ultrafine grinding, drying, ultrafine grinding, the filter cake added dispersant and water with mechanical stirring

what is magnetic separation method in hindi?


Break the slurry with solid content of 55%, adjust the pH value of the slurry is 5.5, send the chip machine for ultrafine grinding, through a series of iron removal grinding PTMS magnetic separation process makes the whiteness of kaolin products reach 87.4%, but the process is complex, the production cost is high, the iron removal rate is high;
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com

SILICA SAND PTMS magnetic separation 20240701

Share to:

Powtech Machinery Company produce magnetic separator, Industrial Magnetic Separators, Industrial magnetic separation equipments,Magnetic Equipment,Permanent Suspension Magnet,Vibrating Equipment