kaolin clay magnet requirements

Daily inspection is the basic work of the maintenance of potassium-sodium feldspar PTMS Electromagnetic Separator iron removal equipment. Electrical control system in iron removal equipment needs to be focused on. Check the wires for signs of breakage, aging, or short circuits. For example, after long-term use, the insulation layer of the wire may be damaged, which may easily cause leakage accidents, threaten the safety of the operator and may damage the equipment.

PTMS magnetic separation

Through the regular PTMS Electromagnetic Separator inspection, the potential problems of the equipment can be found in time to avoid small faults evolving into big problems, so as to ensure the stable operation of the equipment. Also check whether the relay, contactor and other components in the electrical control cabinet are working normally. The failure of these components may cause the equipment not to start normally or to stop suddenly during operation.

how to separate two magnets？

For some iron removal equipment with automatic control system, the PTMS Electromagnetic Separator with high degree of automation, check whether the sensor works accurately. The sensor plays the role of monitoring and feedback in the operation of the equipment, monitoring the liquid level and flow rate of the slurry. If the sensor fails, the equipment will not be automatically adjusted according to the actual situation, which will affect the effect of iron removal.
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com