Magnetic separator equipment

The designed acid immersion tank before PTMS magnetic separation iron removal should regularly check its acid resistance. Due to the strong corrosion of the acid solution, the inner wall of the acid immersion tank may appear corrosion phenomenon. If the acid immersion tank shows signs of corrosion leakage, it should be repaired or replaced in time. The residual acid may continue to corrode the acid tank and affect the accuracy of the next acid immersion reaction.

PTMS magnetic separation

The sealing performance of the acid immersion tank before the PTMS magnetic separation iron removal should be checked to prevent the acid leakage from causing pollution to the surrounding environment. At the end of each acid immersion reaction, the acid immersion tank is thoroughly cleaned to remove the residual acid and reaction products. Cleaning acid immersion tank can be neutralizing the cleaning method, first with alkaline solution neutralization acid, and then rinse with clean water.

what is magnetic separation in Quartz？

In the production of potassium sodium feldspar for ceramics, if the magnetic field strength is insufficient, the fine iron impurities that can be removed will remain in the feldspar powder, when firing ceramics will appear blue or yellow spots, affecting the quality of ceramics. PTMS magnetic separation The iron removal effect is obvious, and the iron content in the product is in line with the normal level.
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com