magnetic separator supplier

Check the transmission components inside the PTMS Electromagnetic Separator, belts, chains, gears, etc. Whether the belt is loose and worn, whether the chain is loose, whether the lubrication is good, whether the gear tooth surface is worn, and whether the engagement is normal, etc. The failure of transmission parts will affect the power transmission of the equipment, resulting in the failure or unstable operation of the equipment.

PTMS magnetic separation

The belt relaxation will cause the reduction of PTMS Electromagnetic Separator drum speed, affecting the effect of iron removal; serious gear wear may produce abnormal noise and vibration, and may even cause equipment shutdown. Check the electrical circuit inside the equipment and check whether the circuit is damaged, short circuit or poor contact. In a humid environment, we should focus on checking the insulation of the line to prevent the occurrence of leakage accidents.

what is magnetic separation method in hindi？

Check the surface condition of the PTMS Electromagnetic Separator drum, whether there is wear, scratch or adhesive phenomenon. In the process of iron removal, the material is in constant contact with the drum surface. If the drum surface is uneven, it may affect the normal movement of the material and the magnetic selection effect of the material. Scricks on the drum surface may cause material accumulation at this site and cannot be effectively sorted. The drum adhesive will reduce the effective working area of the drum and affect the iron removal efficiency.
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com