water cooling electromagnetic separator for Kaolin

Check the supporting parts and fixed parts of PTMS Electromagnetic Separator, bearing seats, anchor bolts, etc. Whether the bearing seat is firmly installed? If the bearing seat is loose, it will cause shaking and noise when the equipment is running. If the anchor bolt is loose, it will cause the overall instability of the equipment, causing vibration and noise. If the slurry concentration is too high, its mobility will become worse, and it is easy to block inside the equipment.

PTMS magnetic separation

At the same time, check the operation of the bearing, the wear or poor lubrication of the bearing will produce noise, you can judge whether the bearing has a problem by listening to the sound, feeling the vibration and checking the temperature of the bearing. For dry process PTMS Electromagnetic Separator iron removal equipment, whether the humidity of the material is too large will also affect the fluidity of the material, resulting in blockage.

what is magnetic separation method？

For PTMS Electromagnetic Separator equipment with drum or rotor, check for roller or rotor balance. If the roller or rotor is not balanced during the manufacturing or installation process, the centrifugal force will occur at high speed rotation, causing equipment vibration and noise. Dynamic balance instrument and other equipment can be used to detect the dynamic balance of the roller or rotor. If the imbalance is found, it should be adjusted or repaired.
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com