magnetic separation equipment

Ultrasonic PTMS Electromagnetic Separator dressing is mainly used to remove secondary iron film (film iron) on the particle surface. The principle is to introduce the ultrasonic wave into the cleaning liquid to produce strong cavitation, and the cavitation produces strong mechanical force to peel off the impurities. The vibration frequency and the residence time of the mineral in the ultrasonic action zone depend on the properties of the surface minerals and their binding strength with the main minerals. Under the action of ultrasound, the film and impurities on the mineral surface dissociate into fine mud and enter the liquid phase to be removed.

PTMS magnetic separation

To improve the PTMS Electromagnetic Separator effect of the treatment, small amounts of reagents and surfactant can be added. For 10 minutes, the iron removal rate can generally reach 46% -70%. However, silica sand, a cheap resource, is relatively expensive at present, and it is difficult to apply in large concentrators. It is suitable for the production field with high purity and low consumption. Moreover, attention should be paid to the timely elimination of waste liquid in time to prevent secondary adhesion and reduce the effect of iron removal.

what is magnetic separation？

Fluoro-free and acid-free method: under natural pH conditions, we can create a unique high-concentration pulp PTMS Electromagnetic Separator flotation environment, but this method has strict requirements for raw sand treatment and pulp environment, and the production is not easy to control, and it is rarely used at present.
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com