dry separator for kaolin powder

Dry iron removal processes are prone to dust generation and low sorting accuracy. In contrast, the wet PTMS ELECTROMAGNETIC SEPARATOR process operates in slurry form, ensuring uniform particle dispersion that enhances mineral separation efficiency. This method also facilitates seamless integration with other wet processing stages (classification, bleaching), making it ideal for large-scale continuous production. The process requires 300,000 tons of kaolin raw material sourced from open-pit mines, with an average Fe₂O₃ content of 1.4%. After undergoing crushing, grinding, and classification, the ore enters the wet strong magnetic separation stage.

PTMS ELECTROMAGNETIC SEPARATOR

Modern wet PTMS ELECTROMAGNETIC SEPARATOR uses high-performance NdFeB permanent magnet material to construct multi-pole magnetic system, combined with closed magnetic circuit design, so that magnetic lines are highly concentrated in the sorting area, the magnetic field gradient can reach more than 10⁴ T/m, the effective action distance is extended to more than 50 mm, and the capture capacity for fine weak magnetic particles is significantly improved.

what is magnetic bead separation?

The PTMS ELECTROMAGNETIC SEPARATOR equipment usually consists of a feed system, a magnetic rotating device, a flushing system and a concentrate/ tailings collection tank. During operation, the pulp flows in from the top, and the magnetic particles are adsorbed on the surface of the rotating ring under the action of the magnetic field. After moving to the non-magnetic area, the magnetic particles are separated by high-pressure water flushing, realizing continuous sorting.
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com