water electromagnetic separator

PTMS MAGNETIC SEPARATOR

what is magnetic separation process？

How to overhaul and maintain wet PTMS electromagnetic separator? The following is your introduction:
1, wet PTMS electromagnetic separator bearing for machine full load, so good lubrication for the bearing life has a great relationship, it directly affects the service life of machine and availability, and requirements into lubricating oil must be clean and seal must be good, the machine's main oil: rotating bearing, roller bearing, all gear, bearing, sliding plane.
2. The newly installed wheels of wet PTMS electromagnetic separator are liable to loosen and must be checked frequently.
3. The wet PTMS electromagnetic separatorr should pay attention to whether all parts of the machine work normally.
4. The wet PTMS electromagnetic separator shall pay attention to check the wear degree of easily worn parts and pay attention to replace the worn parts at any time.
5. Dust shall be removed from the bottom plane of the movable device of wet PTMS electromagnetic separator to prevent the movable bearing from moving on the bottom plane when the machine encounters unbreakable materials, resulting in serious accidents.
6. Wet PTMS electromagnetic separator bearing oil temperature rise, should stop immediately to check the reason to eliminate.
7. If there is any impact sound during operation of the rotating gear of wet PTMS electromagnetic separator stop immediately to check and eliminate it.

How does a magnetic frum separator work?
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com