water separator manufacturers

PTMS MAGNETIC SEPARATOR

how to separate two magnets？

As one of the commonly used magnetic separation equipment, dry PPTMS electromagnetic separator has been used in many areas, especially in arid and water-deficient areas, and its adaptability is particularly good. In addition to the metal raw materials required by the sorting industry, the dry PTMS electromagnetic separator is a good choice for the sorting of important industrial raw materials such as potassium feldspar based on non-metal principles. It adopts a sorting chamber containing magnetic conductive stainless steel rod, steel plate or steel wool to form a high-gradient magnetic field in a strong magnetic field, thus possessing a high magnetic force.
Dry PTMS electromagnetic separator as a highly efficient magnetic separation equipment, its after-work maintenance can not be ignored, choose a few key points to help you understand the maintenance of dry PTMS electromagnetic separators elements.

First of all, long-term use of equipment mineral processing may cause wear on the inner wall of the magnetic cylinder, causing the glue to fall off. If found, please timely clean and hang the glue again. The belt driven by the motor is the transmission device. If the belt is badly worn, it will cause low ore dressing efficiency, so please replace a new set of belts seriously.
Secondly, about the dry magnetic separators internal debris and lubrication, magnetic separation is mainly iron selection work, to regularly clean up the barrel body, if found at the bottom of the debris dropped, to timely clean up, and between the bearings to timely clear debris and then do a good job of lubrication.
Finally, about the heating of dry PTMS electromagnetic separator, the heating is usually caused by the motor. In case of this, it is necessary to timely check the line problem to see whether the voltage is stable and the line is normal. If there is aging, it is necessary to replace it.

How is magnetic separation used in everyday life?
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com