B series special PTMS electromagnetic separator
published date: 2020/9/17
feldspar mineral processing
PTMS MAGNETIC SEPARATOR
how to separate two magnets ?
According to the mineral processing conditions (feed size, concentration, ore quantity, etc.) and the similarity of separation requirements, the different operations of magnetite concentrator are divided into 4 representative separation links.
(1) Pre-selection before grinding after fine grinding.
(2) Rough sorting after grading of a section of grinding.
(3) The secondary magnetic separation and screening of the second stage grinding after classification three picks.
(4) Sweep and control tailings loss and tailings reoccurrence in case of failure
Optional.
The four sorting links cover all the links where customers have sorting conditions and values. On this basis,PTMS has specially designed B series special PTMS electromagnetic separator, including BY series of cylindrical magnetic separators for magnetite pre-separation. It can be used for pre - separation of magnetite ore after it is finely broken and before grinding. It can also be used for sorting of ore discharge by self-grinding machine or semi-self-grinding machine. BC magnetite coarse separation cylinder magnetic separator, used for a stage of grinding classification overflow coarse; The drum type magnetic separator is used for the selection of the second stage grinding overflow and the final separation stage; BW magnetite tailings to choose the drum type magnetic separator, used to sweep and control the failure of the tailings loss, etc., can also be used for the old tailings reservoir in the recovery and utilization of ferromagnetic minerals.
What are the benefits of magnetic separation?
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com