B series special cylinder PTMS electromagnetic separator has been promoted and applied in some customers
published date: 2020/9/18
feldspar processing
PTMS MAGNETIC SEPARATOR
what is magnetic bead separation?
Case 1: The customer first USES the combination of B-1 and B-2 pre-selector for pre-selection before grinding after fine grinding. With the increase of production, two B-4 preselectors were used to replace the original B-1 and B-2 preselectors. The rate of qualified tailings removed is 15% ~ 20%, and the grade is similar to the grade of comprehensive tailings required by customers. Under the condition of fully raising the grade of crude concentrate, the recovery rate is over 97%. B-6 and B-4 magnetic separators are used for magnetic separation after grinding, and the sorting index is very ideal.
Case 2: the B - 4 type magnetite roughing with drum magnetic separator, and BJ - 4 type consisting of one rougher, one processing system, in the beneficiation workshop for broken after wash minerals have not entered a mill lotion and filtering the filtrate of the mixture of both, the B - 4 roughing machine sorting result with experimental magnetic separation tube similar effect.
Case 3: In the application of BJ selected PTMS magnetic separator, the bJ-1 selected PTMS magnetic separator can be further improved by 1.29% when the conventional secondary magnetic separator only improves the grade by 1.54%, indicating that the sorting efficiency of the separator is very high and it plays an important role in stabilizing and improving the quality of iron concentrate on the production site. The B-1 tailings reseparator has also obtained satisfactory results in the application.
The B series special cylinder PTMS electromagnetic separator is very successful in design concept, magnetic field distribution, tank structure design and so on. This magnetic separator has been applied to many customers in different separation segments and has achieved good separation indicators. This kind of equipment has been serialized, with large specifications of 1 200mm× 4 500mm, 1 500mm× 4 000mm, and single machine processing capacity up to 200T /h, which can meet the requirements of large-scale mining production.
What jobs use magnetic drum separator work?
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com