water cooling electromagnetic separator

PTMS MAGNETIC SEPARATOR

what is magnetic separation process ？

The semi-countercurrent wet PTMS electromagnetic separator is suitable for the cleaning and selection of highly magnetic materials with the particle size of 0.5mm or less, and the semi-counter-current wet PTMS electromagnetic separator is especially suitable for the selection of minerals with the particle size of 0.15~0mm. Or remove the non-magnetic minerals mixed in the strong magnetic minerals. The semi-counter-current wet PTMS electromagnetic separator can obtain high quality iron concentrate and at the same time obtain a good recovery rate, so the semi-counter-current PTMS magnetic separator is widely used by customers in production practice. The semi-countercurrent wet PTMS magnetic separator can continuously feed and discharge ore, with high magnetic field intensity and high magnetic field gradient, and has high processing capacity. Can be multiple series and parallel, to achieve multiple sweep and selection.
Working principle of semi-counter-current permanent magnet drum-type PTMS separator:
Wet PTMS magnetic separator is under the action of magnetic field, magnetic particles are magnetized to form a magnetic group or chain, or the chain moves towards the magnetic pole under the action of magnetic force in the slurry, and is adsorbed on the cylinder. After the slurry flows into the tank through the feed tank, under the action of the water flow of the feed water pipe, the ore particles enter into the feed area of the tank in a loose state. Under the action of the magnetic field, the magnetic particles form a "magnetic mass" or "magnetic chain". The "magnetic mass" or "magnetic chain" in the slurry is affected by the magnetic force, moving towards the magnetic pole, and is adsorbed on the cylinder. Cylinder due to the polarity of the magnetic poles along the direction of rotation is arranged alternately, and fixed at work, "magnetic group" or "magnetic chain" in the cylinder rotates, with alternating polarity magnetic stirring, was mixed in the "magnetic group" or "magnetic chain" of the gangue and other non-magnetic minerals in turn off, eventually get sucked on the surface of the cylinder, the "magnetic group" or "magnetic lotus" is to concentrate. Concentrate is transferred to the weak magnetic force at the edge of the magnetic system along with the cylinder and discharged into the concentrate tank under the action of flushing water ejected from the discharge pipe. Non-magnetic or weakly magnetic minerals are left in the slurry to be drained out of the tank, which is tailings.
In addition, the concentrate is transferred to the weak magnetic force at the edge of the magnetic system along with the cylinder, and is discharged into the concentrate tank under the action of the flushing water gushing out of the discharge pipe. If it is a full magnetic roller, the discharge is carried out with a brush roller. Non-magnetic or weakly magnetic minerals are left in the slurry to be drained out of the tank, which is tailings.
What are the examples of magnetic separation?
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com