magnetic separator for sale

PTMS magnetic separation

what is magnetic separation method in hindi？

Silicon sand can also be called quartz sand to a certain extent, but the content of silicon dioxide is different. This mineral is colorless crystal, and when it contains a lot of iron impurities, it will appear yellow or light yellow. Generally, the application value of this mineral is higher after iron removal purification, which requires a dry silicon sand PTMS magnetic separator. The main function of dry silicon sand PTMS magnetic separator is to purify iron from silicon sand.
Principle of silicon sand dry PTMS electromagnetic separator
Silica sand dry strong magnetic PTMS electromagnetic separator for magnetic mineral separation magnetic separation machine, silica sand ore by feed cylinder discharge after strong magnetic minerals in advance by evenly into the ore belt, and belt to the disk gap in the following field, weak magnetic minerals by magnetic effect, sucked into the sharp teeth of the disk, and with the rotating disk to the sides of the belt here due to the magnetic field strength fell sharply, so under the action of gravity and centrifugal force, behind the belt on both sides of the magnetic products into the trough, generally to concentrate, non-magnetic product from the belt to the tailings into nonmagnetic products trough, Generally for tailings. After the whole operation, it can be seen that the equipment works smoothly, has large handling capacity, is easy to operate and easy to maintain.
Advantages of silicon sand dry PTMS magnetic separator
The silicon sand dry PTMS magnetic separator has multiple advantages, in which the magnetic system of the equipment is made of high-quality ferrite material or composite with rare earth magnetic steel. The first magnetic roller is swept by weak magnetic separation, mainly to remove the strong magnetic substances in it. The second magnetic roller USES weak magnetic separation for fine iron removal, mainly removing impurities and other weak magnetic substances; The average magnetic induction intensity of the cylinder of magnetic separation equipment is high, which is 100 ~ 600mT. In addition, the silicon sand dry PTMS magnetic separator adopts this method for purification, which has a large production capacity and can work continuously for 24 hours, thus achieving high production efficiency and meeting the requirements of customers for mass production.
How does a magnetic frum separator work?
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com
Feldspar Dry Processing Line