magnetic separator supplier
PTMS magnetic separation
what is magnetic separation process？
Plate magnetic separator through the effective arrangement of more than 1000 strong magnets, so that the surface of the entire plate magnetic field intensity up to 14000GS, the magnetic field gradient throughout the entire separation area. Can effectively treat all kinds of weakly magnetic ore, especially for manganese ore, hematite, limonite, mirror iron ore treatment effect is excellent. It can also be used for high purity iron removal of non-metallic materials, which can reduce the iron content in potassium feldspar, fluorite and quartz sand
I. Principle of flat PTMS electromagnetic separator
Tablet PTMS magnetic separator structure, using the belt type of classifiers in the work area from feed to discharge, the material in the belt drive, the magnetic stirring material for many times, at the same time under the influence of water washing, excluding magnetic tailings to remove, with magnetic minerals by belt conveyor to plate separator magnetic area, thus with magnetic minerals by magnetic device off, off to finish dressing process, low power, large processing, high magnetic field intensity, and achieve a good quality, access to greater benefits.
2. Application scope of flat PTMS electromagnetic separator
It is suitable for wet magnetic separation of magnetite, pyrrhotite, calcined ore, ilmenite and other materials with particle size below 3mm, and also for iron removal of coal, non-metallic ore, building materials and other materials. Magnetic separators of the magnetic system, the use of high quality ferrite materials or rare earth magnetic steel composite. The magnetic field intensity of the machine is very high, it set physical mechanics, fluid mechanics, magnetic and one, according to the different magnetic ore, such as: pseudomagnetite, weak magnetite, hematite, manganese and other weak iron ore of the different characteristics, select some weak magnetic minerals.
3. Advantages of flat PTMS electromagnetic separator
1. The magnetic blocks on the whole machine are all high-intensity magnetic blocks, with the surface magnetic field strength above 14000GS.
2, the motor power is small, compared to the conventional magnetic separator power saving.
3.The belt structure is adopted to save large amount of money and save electricity.
What are the examples of magnetic separation?
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com
