magnetic separator suppliers
PTMS magnetic separation
how to separate two magnets?
Feeding water concentration on PTMS electromagnetic separator is used for low grade weak magnetic iron ore separation or used for iron removal operations of various industries, can be a one-time increase by 3-15 grade, big degree of solved the problem of the historically low grade iron ore cannot be purified, solved the low grade iron can't charging smelting and sales, it is difficult for you find a way out low grade ores, create considerable economic benefits, the equipment is less investment returns, is less investment quick effect of good product.
Working principle of PTMS electromagnetic separator for feed water separation:
Feed 5-8 mm raw ore into the upper hopper, pass the vibration motor to vibrate the cloth, the output quantity can be precisely adjusted by hand wheel. The magnetic roller is driven by the speed regulating motor, and the speed of the speed is adjusted by the speed regulating meter, which can control the output and concentrate grade of the magnetic separator. Particles into the magnetic roller sorting, because of the iron ore of magnetic, immediately be strong magnetic adsorption on the magnetic roller, gangue particles (miscellaneous stone, sand) with no magnetic, magnetic is very weak, the magnetic roller strong magnetic suction on it does not, as the rotation of the magnetic roller ore grain has been on the magnetic roller, absorption and gangue particles in magnetic roller to the front position thrown off in front of the ore plate isolation (ore by changing plate Angle can be adjusted the size of the concentrate grade), particles continue to be magnetic roller to magnetic area automatically fall off into a collection bucket collection to concentrate the finished product. Since there are some ore grains with weaker magnetism in the gangue falling from the upper magnetic roller, they will enter the lower magnetic roller to continue magnetic separation. The finished ore grains after magnetic separation will enter the secondary collector bucket and be collected as finished products. The outcast gangue will be discharged through the tailings, thus the magnetic separation process ends. Because gangue in the raw ore is abandoned, the grade of iron ore is improved. The power consumption of the whole equipment is 4-11kW, and the input cost of magnetic separation is quite low. High intensity magnetic separator is a new type of iron removal equipment developed by our company, whose technology is quite mature. Welcome new and old customers to visit our company!
The barrel skin of the ore dressing equipment of PTMS electromagnetic separator for feeding water is equipped with imported wear-resistant coating, which is 8-10 times more wear-resistant than ordinary barrel skin. The operation is simple, and the barrel skin can be maintained during production without affecting the production schedule. Our company is a domestic manufacturer of iron removing equipment.
Which metal cannot be separated by magnetic separation?
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com