Mineral processing equipment

PTMS MAGNETIC SEPARATOR

what is magnetic separation process？

In recent years,PTMS has carried out a lot of experiments on the upsizing of permanent magnet drum-type magnetic separator, as well as on the ore feeding mode, magnetic meter and tank structure, etc., and some results have been achieved.
The maximum size of the cylinder type PTMS electromagnetic separator is 1050mm×3000mm, and the surface magnetic field strength of the cylinder is 120 ~ 400kA/m. Its magnetic system and separation tank are uniquely designed. The backwash water device is set at the feeding place, and the magnetic force can be adjusted to form the multi-field separation process of gravity, hydraulic, inertial and magnetic forces. The magnetic minerals move in reverse with the overflow, and a part of gangue along with the overflow discharge from the back of the overflow weir into the tailings, realizing the first separation of fine tail. The magnetic concentrate was impacted by the reverse flushing water, which destroyed the magnetic agglomeration and made gangue escape from the magnetic mineral, and discharged along with the overflow, realizing the second separation of the selected mineral. The fine grade monomer iron concentrate and the eutrophication body mixed in gangue continue to be influenced by magnetic force during the discharge process and settle to the bottom of the tank to be sent to the sweep section for recovery. The above process improves concentrate grade and beneficiation efficiency. PTMS cylinder magnetic separator has been used in concentrators of large mining companies, which has obviously improved their economic and technical indexes and equipment level.
How is magnetic separation used in everyday life?
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com