drum separator

PTMS MAGNETIC SEPARATOR

what is magnetic separation process？

Dry PTMS electromagnetic separator magnetic cylinder internal entered the clutter is the production of a problem may happen, but from inside the magnetic drum into the debris, especially hard foreign body, light person the magnetic drum drum skin scratch, the person that weigh can lead to dry PTMS magnetic separator roller jammed, the most serious is the magnetic cylinder barrel skin cut, make the magnetic separator can't use. So how to do in this case, can effectively prevent this situation to dry PTMS electromagnetic separator drum harm, the most direct way is to normally dry PTMS electromagnetic separator drum proper maintenance and maintenance.
1. When this phenomenon occurs, it is necessary to stop the machine immediately to remove the sundries;
2. Bolts, nuts, iron wires and other metal items must not be dropped into the magnetic separator during normal maintenance;
3. In order to avoid large ore entering the drum of dry PTMS electromagnetic separator with slurry, a sieve plate should be added at the feeding place to block large ore and sundries, and the bulk ore separator should be cleaned from time to time. It is strictly prohibited for large ore not ground to enter the drum of dry PTMS magnetic separator.
Which ore is used in magnetic separation method?
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com