Limonite dry PTMS electromagnetic separator uses only 4 kW of electricity
published date: 2020/12/13
wet high intensity magnetic separator
PTMS MAGNETIC SEPARATOR
what is magnetic separation used for?
The limonite dry PTMS electromagnetic separator, also known as the dry permanent magnet roller magnetic separator, is a professional equipment for the separation of hematite. The magnetic field strength of the equipment is up to 14500 Gauss, with a large magnetic field gradient, low power consumption, and stable performance. The equipment has an excellent separation effect for low-grade weak magnetic hematite.
The operation process of the limonite dry PTMS electromagnetic separator is as follows: the raw ore of 0.5-5 mm is fed into the upper hopper and the material is oscillated by the oscillating motor. The output quantity can be precisely adjusted by the handwheel. The magnetic roller is driven by the speed regulating motor, the speed of speed is adjusted by the speed regulating meter, and the output value of the magnetic separator and the grade of concentrate can be controlled. Ore through magnetic roller conveyor belt was sent to the sorting, because of limonite ore grain of magnetic adsorption was immediately magnetic field on the magnetic roller, and gangue particles (miscellaneous stone, sand) because there is no magnetic extremely weak magnetic, magnetic roller strong magnetic suction on it does not, follow the change of magnetic roller, ore grain has always been on the magnetic roller, absorption and gangue particles in magnetic roller to the front bearing is thrown away in the ore in the front of the board (altered ore insulation board viewpoints of intrusive can adjust the grade of the concentrate), continues to be a magnetic roller belt to take off the magnetic ore zone initiative fall into a collection bucket to collect into concentrate products. Because the gangue falling from the upper magnetic roller contains some ore grains with weaker magnetism, they will enter the lower magnetic roller for continuous magnetic separation. The finished ore grains after magnetic separation will enter the secondary ore bucket to collect as products, and the outcast gangue will be discharged through the tailings, and the magnetic separation process is completed here. The grade of limonite was upgraded because gangue in the raw ore was thrown away. The power consumption of the whole equipment is only about 4 kilowatts, so the input cost of magnetic separation is relatively low.
What jobs use magnetic drum separator work?
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com