Special cylinder type PTMS Electromagnetic Separator 4 sorting links

PTMS Electromagnetic Separator

What are the examples of magnetic separation?

According to the same mineral processing conditions (feeding granularity, concentration, ore amount, etc.) and separation requirements of kaolin, potassium-albinite and quartz sand, the different operations of magnetite concentrator are divided into four representative separation links. (1) Pre-selection before grinding after fine grinding. (2) Rough separation after a stage of grinding and grading. (3) the second stage of grinding classification after the secondary magnetic separation and screening
Three picks. (4) Sweeping and beneficiation, controlling tailings loss and tailings re-beneficiation when failure occurs. The four separation links, covering the separation conditions and separation value of magnetite concentrator at present. On this basis, the production of the specific design of the cylinder PTMS Electromagnetic Separator, including :① kaolin preselecting cylinder PTMS Electromagnetic Separator series. It is used for pre-concentration of magnetite after fine crushing and before grinding, and can also be used for sorting of ore discharged by self-mill or semi-self-mill. (2) Potassium sodium feldspar roughing with cylinder type PTMS Electromagnetic Separator, used for a roughing of a stage of grinding classification overflow; (3) The cylinder type PTMS Electromagnetic Separator is used for the second stage of grinding and classifying the overflow and the final stage of separation. ④ The cylinder type PTMS Electromagnetic Separator is used for cleaning and controlling the loss of tailings when failure occurs. It can also be used for the recycling and utilization of ferromagnetic minerals in the old tailings pond.
What are the examples of magnetic separation?
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com