feldspar processing

PTMS magnetic separator in the determination of the degree of monomer dissociation, the different grinding particle size of the degree of monomer dissociation were measured. It is concluded that when the grinding fineness reaches 90% of -0.030mm, the monomer liberation degree of the ore can reach about 85%. Therefore, in order to escape the monomer gangue as soon as possible and avoid the next stage of grinding operation, the process should select the stage of grinding and the stage of separation.

PTMS MAGNETIC SEPARATOR

Left tail test results tell us in advance the customer, under the condition of the inclusion of the same size, wet primary separation effect is better, aside from the tail mineral rate is high, the magnetic iron content is low, the rough concentrate recovery nearly 1.5% higher than that of dry, choosing wet primary test to into the left tail homework in advance before grinding, rough concentrate producing grinding choose the assignments. PTMS magnetic separator can remove the iron inside (Fe2O3). It can be seen from the grinding test results of pre-concentration concentrates that the process of wet pre-concentration with three stages of grinding and four stages of magnetic separation can obtain higher concentrate content.

what is magnetic separation method?

These test results we can get the very lean magnetic ore dressing method, that is, the use of wet pre-separation - stage grinding ---- low intensity magnetic separation process, PTMS magnetic separator has a reasonable process, process stability, strong adaptability and other characteristics, and easy to implement in the actual production.
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com