magnetic separator conveyor

Concentrator from mineral recovery concentrate, the original beneficiation process for spiral chute roughing, shaking table single gravity separation process, because the spiral chute and shaking table on fine particle recovery is very low, the recovery of the whole process is only about 7%. The plant adopts PTMS magnetic separator to establish a new ore processing process. The process is characterized by: By PTMS disc strong magnetic materials such as iron pause from residual magnetite beneficiation feed full graded into PTMS magnetic separation machine one roughing once selected, avoid the loss of minerals in the hydraulic classifier overflow (due to hydraulic classifier classification efficiency is not high, the overflow of tend to have about 15% + 20 microns mineral is suitable for the flotation recovery).

PTMS magnetic separation

PTMS magnetic separator itself has the role of desliming, can be most of the 10 μm below the slime into the tailings; In the fine operation of PTMS magnetic separation machine using a lower background magnetic induction intensity, but also most of the -20 μm slime into the tailings (-20 μm slime before entering the flotation to remove as much as possible, otherwise it will cause adverse effects on flotation);

what is magnetic separation method in hindi?

The fine ore rate of PTMS magnetic separator is only about 16%, and then the residual slime of -20 μm is removed by a small high-efficiency thickener, and then qualified concentrate is obtained by flotation. This process increases the recovery rate from 7% to about 27% in gravity separation process.
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com