Mineral processing equipment

1: with the measuring cylinder connected with a liter of magnetic mineral separation, standing for 5 minutes, and then a strong magnet tied with a line, sink to the bottom of the measuring cylinder, adsorption, one minute after taking out, observation and comparison.
2: take a strong magnetic separator in the PTMS mineral back and forth a few times to see how much with the medium, but each time the number of times the best is the same, very simple!
3: do a single machine inspection bai, but it is a little trouble! Sampling, testing.

PTMS MAGNETIC SEPARATOR

4: sampling, magnetic separation tube magnetic separation experiment, detection of mineral medium quality, and from the drum to see whether the use of water spray clean, if not clean, observe the roller with medium along the ore logistics whether there is a black line flow, black line that runs away the medium. Pay attention to the technical parameters of PTMS magnetic separator reasonable adjustment of flow, and granularity control.

what is magnetic separation process?

5: PTMS magnetic separator running medium is finally in the slime, can be detected by the content of magnetic slime to calculate the magnetic separator per ton of the original mineral running medium.
6: see overflow overflow flower not, generally overflow height is more than two finger height of dam run medium.
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com