water cooling electromagnetic separator for Quartz

From the point of view of dissemination size, a grinding fineness of about 95% 0.038 mm is likely to obtain a concentrate with a higher grade (TFE grade >65%). PTMS magnetic separator is the best choice.

PTMS magnetic separator

The determination of PTMS test scheme and the test results show that three stages of grinding and separation are needed to obtain a grinding fineness of about 95% 0.038 mm with a lower grinding cost. Because the magnetic ore is the only target mineral in the ore, the conventional research on three-stage grinding and three-stage low intensity magnetic separation technology has been carried out. PTMS magnetic separator is the best choice.

what is magnetic separation in Quartz?

As the reverse flotation is often more efficient than low intensity magnetic separation in magnetic ore cleaning operations, the reverse flotation of low intensity magnetic separation concentrate can often obtain qualified concentrate at a coarser grinding fineness, or partial qualified concentrate can be extracted at a coarser grinding fineness, thus reducing the amount of three-stage grinding. Therefore, according to the two-stage low intensity magnetic separation concentrate reverse flotation, reverse flotation tailings grinding a low intensity magnetic separation, low intensity magnetic separation concentrate return reverse flotation stage grinding stage low intensity magnetic separation, reverse flotation process was further studied. PTMS magnetic separator is the best choice.
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com