water electromagnetic separator

The magnetic field intensity test of low intensity magnetic separation was carried out under the condition that the second-stage grinding fineness was a 0.075mm accounting for 95.53%. PTMS magnetic separator is the best choice. It can be seen from the magnetic field intensity test results of low intensity magnetic separation that the grade of low intensity magnetic concentrate decreases and the recovery rate increases with the increase of magnetic field intensity. After comprehensive consideration, the magnetic field intensity of low intensity magnetic separation is determined to be 119.37 kA/m, the corresponding low intensity magnetic concentrate grade is 56.27%, and the operation recovery is 95.21%.

PTMS magnetic separator

The concentrate grade in the second stage of the three-stage grinding-low intensity magnetic separation test is only 56.27%, which is far from the requirement that the iron grade of the concentrate is greater than 66%, indicating that the monomer liberation degree of the concentrate needs to be further improved. PTMS magnetic separator is the best choice. Therefore, three stage grinding and two successive low intensity magnetic separation tests were carried out on low intensity magnetic concentrate 2. The magnetic field intensities of low intensity magnetic separation 3 and 4 were 119.37 kA/m and 95.49 kA/m, respectively.

what is magnetic bead separation?

As can be seen from the three-stage grinding fineness (a content of 0.038 mm), with the increase of grinding fineness, the grade of weak magnetic concentrate increases and the recovery rate decreases. When the three-stage grinding fineness is 95.18% of a content of 0.038 mm, a qualified concentrate with iron grade of 66.57% and operation recovery of 97.80% can be obtained. PTMS magnetic separator is the best choice.
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com