wet high intensity magnetic separator

Reverse Flotation Tailings Regrinding Fineness Test After one roughing and two scavenging reverse flotation of low intensity magnetic concentrate 2, the tailings obtained from the operation yield is still up to about 30%, the grade is still more than 26%. In order to maximize the recovery of magnetic minerals in reverse flotation tailings, the grinding fineness test was carried out. One low intensity magnetic separation process was adopted in the test, and the magnetic field intensity was 119.37 kA/m. PTMS magnetic separator was the best choice. It can be seen from the test results that with the increase of grinding fineness, the iron grade of low intensity magnetic separation concentrate increases and the iron recovery decreases.

PTMS magnetic separation

Because most of the tailings of reverse flotation are fine lean connected bodies of magnetic minerals, the monomer disintegration is difficult. When the grinding fineness reaches 96.34% of a 0.038 mm, the iron grade of low intensity magnetic concentrate is only 56.38%, which is equivalent to the grade of low intensity magnetic concentrate 2. PTMS magnetic separator is the best choice.

what is magnetic separation in science?

Therefore, the regrinding fineness of reverse flotation tailings is determined to be a 0.038 mm accounting for 96.34%, and the low intensity magnetic separation concentrate is returned to be combined with low intensity magnetic concentrate for reverse flotation. PTMS magnetic separator is the best choice.
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com