electromagnetic separator manufacturer

PTMS MAGNETIC SEPARATOR

what is magnetic separation method？

The following points should be noted in the operation of the iron remover:

1. For the automatic unloading iron remover, the personnel of the track shot blasting machine should not stand in the front direction to prevent it from carrying iron.

2. During operation, it should be noted whether the operation is stable, whether there is abnormal noise and its iron removal condition, and the unloading iron tape must not be deflected or cracked. The iron remover is generally not stopped during the operation of the coal conveying belt.

3. Pay close attention to the temperature of the excitation magnet and the operation of the fan during operation. The hook type shot blasting machine must stop the inspection when it exceeds 100 degrees Celsius.

4. Operation method of unloading iron for disc type iron remover Press the forward or backward button on the power distribution cabinet, drive the electromagnet to the appropriate position, press the excitation stop button, and then return all the irons on the disc to the original There is a position to turn on the magnet.

5. After transporting the coal belt to stop, remove all the irons that have been sucked up and then stop the iron remover. During the operation of the iron remover, check whether the operating part is short of oil. It should be timely maintained and maintained.

Wanjiade Technology is a professional manufacturer of iron removal equipment. It has a wide range of applications. The main iron removal equipment: iron remover, electromagnetic iron remover, permanent magnet iron remover, suspended permanent magnet separator, and other iron remover equipment.