magnetic separation diagram

PTMS MAGNETIC SEPARATOR

what is magnetic bead separation ?

During the use, occasionally there will be too much iron absorption. What should I do at this time? Professional iron separator manufacturer Jialong Electromechanical Technology Co., Ltd. tells you: First of all, stop using it, carry out iron removal work, of course, if it is stopped every day. All can be overhauled to avoid such situations. Here we look at a few key points of the work of removing iron:

First, before the start of the cleaning work, the dispatching room should be notified to turn off the power supply, and then cleaned after the belt conveyor stops conveying the materials, so as to prevent the working machine from injuring people.

2. After the belt conveyor stops, put the two control command switches “on the ground” and “set control” on the operation box of the belt conveyor head to the “parking” position. Don't forget to hang the “stop sign”.

Third, then go to the control cabinet of the permanent magnet separator to remove power to the iron remover, mark it on this button, for example, hang a warning sign with “someone working, no closing” to avoid other staff members not understanding When the situation is wrong, the switch is turned on and the person is injured.

Fourth, the last step is to clean the iron remover. First of all, clean all the irons falling from the iron remover. Then press the power switch to re-power the iron remover, remove the warning sign hanging on the button, and finally hit the master switch to the "collection control" position.

When removing iron from the iron remover, it is necessary to do the corresponding protection work. After all, safety is the first priority.