Welcome to Foshan Powtech Technology Company Limited!https://www.powtechina.com

Introduction

Kaolin Wet Processing

Kaolin production line

Kaolin is a kind of non-metallic mineral, which is a kind of clay and clay rock mainly composed of Kaolin clay minerals. Because it is white and delicate, it is also called Baiyun soil. It is named after Gaoling Village, Jingdezhen, Jiangxi Province.


Notes:

     Due to the different ore content and composition of each user's investment, the corresponding mineral processing technology may increase or decrease, and the investment company should purchase a full set of processing equipment for the mineral processing line according to its actual mineral situation. Of course, it is also possible to directly consult Wanjiade technicians online and will give specific solutions. WJD TECH mineral processing engineering for the full set of ore processing equipment, whether it is milling processing, or mineral processing, you can buy a full set of equipment here, as for the specific price, configuration, etc., online consultation or direct call customer service phone.

     The magnetic separation production line has the advantages of high efficiency in process design, high handling capacity, energy conservation and economic rationality. The process design has high cost performance, guarantees fine powder content and yield, low production cost, and low pollution. WJD TECH will design the most reasonable and efficient mineral processing equipment according to the needs of customers.

 

 

 

 

Dispersion machine

     The dispersion machine is widely used in coatings, high-efficiency equipment for stirring and dispersing and dissolving solids, and widely uses chemical products such as paints, inks, pigments, and adhesives. The machine consists of five parts: hydraulic system, main drive, stirring system, guiding mechanism, and electronic control box. Each part is compact and reasonable. Dispersed plate type: flat plate serrated, sculpt, dish, other forms.

 

 

 

Spiral classifier

     Spiral classifier is one of the equipment for mineral processing. The spiral classifier is mechanically graded by the principle of different velocity of precipitation in liquid, with the help of the specific gravity of solid particles. The powder material can be grinded in the mill to be filtered. Then the coarse material is screwed into the feed inlet of the mill, and the filtered fine material is discharged from the overflow pipe. The spiral classifier is divided into four classifiers, namely, high weir type single helix and double helix, sunk single helix and double helix.

 

 

 

 

vibrating screen

     The wire vibration sieve is driven by a dual vibration motor. The two motor axles have a dip angle in the vertical direction. Under the combined force of the excitation force and the self-gravity of the material, the material is thrown on the sieve surface to jump or move forward in a straight line to achieve the purpose of screening and grading the material.. It is suitable for sieves of dry powder or granular materials with granularity of 0.074-10mm, water content less than 7 %, and no viscosity. The maximum feed size is not easily greater than 10 mm.

 

 

 

 

 

 

Water-cooled magnetic separator

      The water-cooled electromagnetic slurry automatic magnetic separator is a new type of high efficiency magnetic separator. The deionized water is circulate in the hollow copper tube through the circulating pump, and the heat generated by the copper tube is taken away. Based on this special structure, the automatic iron removing machine for water cooled electromagnetic slurry has the following advantages: high magnetic induction intensity, small internal temperature rise, low magnetic induction intensity in long term operation, high production per unit working time, wide adaptability to ore granularity and concentration, high efficiency of ore dressing, convenient operation and maintenance.

 

 

 

 

Filter press

    The composition of the hydraulic compression mechanism of the filter press consists of a hydraulic station, a cylinder, a piston, a piston rod, and a structure of the Havran card hydraulic station connected to the piston rod and a compaction plate. The motor, oil pump, overflow valve(regulating pressure) change valve, pressure gauge, oil flow, and fuel tank.

 

     Filtering method: The way the filter flows out clearly separates the flow filtration and the dark flow filtration. The open flow filtration, each filter plate under the liquid hole is equipped with a water hole, the filter is intuitively out of the water hole. Dark-flow filtration, each filter plate is provided with a liquid channel hole, a number of filter plate liquid hole connected to a liquid channel, by the thrust plate below the liquid hole connected to the pipeline discharge.

Recommend Products

Water-cooled electromagnetic separator series
Water-cooled electromagnetic separator series
Permanent magnetic roller series
Permanent magnetic roller series
Powtech Machinery Company produce magnetic separator, Industrial Magnetic Separators, Industrial magnetic separation equipments,Magnetic Equipment,Permanent Suspension Magnet,Vibrating Equipment