magnetic separation diagram

The process of stage grinding, low intensity magnetic separation and reverse flotation is one of the effective processes to improve concentrate. The main operation process of this process is as follows: the final concentrate is obtained by one rough separation and one cleaning; the reverse flotation foams are regrinding after concentrated magnetic separation; the regrinding products are tailing thrown after defluxing and repeated sweeping magnetic separation; the magnetic concentrate is returned to reverse flotation operation for reseparation.

PTMS Magnetic Separator

As a whole, the middle beneficiation process mainly uses the magnetic strength of the ore and the magnetic induction equipment of PTMS magnetic separator to select the iron ore directionally, which greatly improves the beneficiation efficiency. Especially in some low grade iron mines, can play a very satisfactory selection effect.

what is magnetic separation in Feldspar?

A cationic reverse flotation process was adopted in a concentrator to obtain the final concentrate after one rough separation and one cleaning. The reverse flotation foam was regrinding after concentrated PTMS magnetic separation, and the regrinding products were tailing thrown after defluxing and multiple magnetic sweeping, and the magnetic separation concentrate returned to reverse flotation operation for reseparation. The concentrate grade increased from 64% to 68.89%. The SiO2 content in the concentrate decreased to below 4%, and the recovery of the minerals was over 98%.
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com