Wet / Slurry Magnetic Separators (Wet Electromagnetic Separators): Price & Quotation
A wet electromagnetic separator, also called an electromagnetic slurry magnetic separator, cleans liquid feeds such as kaolin, feldspar, quartz slurry and ceramic glaze. Slurry passes through an energized high-gradient matrix that holds fine iron; the coil then switches off and flushes the iron away. Water- or oil-cooled coils keep the field stable in continuous duty.
Oil Cooling Electromagnetic Slurry Magnetic Separator 1000 ModelWet / Slurry Magnetic Separators
Water-Cooled Electromagnetic Separator SeriesWet / Slurry Magnetic Separators
Water-Cooled Electromagnetic Slurry Magnetic SeparatorWet / Slurry Magnetic Separators
7A160 Wet MagnetWet / Slurry Magnetic Separators
Electromagnetic Slurry Magnetic Separator Type 1000Wet / Slurry Magnetic Separators
Wet Slurry Magnetic Separator for Ceramic SlurryWet / Slurry Magnetic SeparatorsWet electromagnetic separator for slurry: how it works
Slurry enters the bottom of an energized coil and rises through a stainless magnetic matrix. Iron filings, oxide coatings and fine weakly magnetic minerals are held by the high field gradient. At the end of each cycle the feed stops, the coil de-energizes and water flushes the trapped iron to a separate outlet, all controlled by PLC.
Choosing an electromagnetic slurry magnetic separator
Model choice depends on solids content, particle size, throughput and the target purity. Water-cooled coils suit large continuous lines; oil-cooled coils suit sites with limited water quality. Related reading: electromagnetic slurry separator series, kaolin iron removal, feldspar, wet drum vs. high-gradient separators.
Wet magnetic separator price: what decides the cost
PTMS does not publish prices: the price follows the configuration. What sets it:
- Type — wet or dry, electromagnetic or permanent
- Size and field — working cavity and background field for your throughput
- Matrix and cooling — steel mesh or steel wool; water or oil cooling
- Contact parts and automation — stainless parts, flushing valves, PLC
What to send for a quotation
- Material, slurry or dry powder
- Capacity and particle size
- Current and target iron content
- Supply voltage and destination
Get a factory quotation by email Free sample test
We usually reply within 24 hours. Full guide: magnetic separator price.
Wet slurry separators: buyer questions
Wet drum separator or electromagnetic slurry separator?
Wet drum separators recover strongly magnetic material such as magnetite. For removing fine, weakly magnetic iron from kaolin, feldspar or glaze slurry, a high-gradient electromagnetic slurry separator is usually the better fit.
Water-cooled or oil-cooled coil?
Water cooling is common on large continuous lines with good water supply; oil cooling keeps the coil sealed where water quality is a concern. We recommend one after reviewing your site.
Can I test my slurry before ordering?
Yes. Send 5–10 kg of material for a free pilot test; the report follows within 5 days of receiving your sample. Results vary by ore.
What is the price of a wet magnetic separator?
It depends on type, cavity or drum size, background field, matrix, cooling and automation. PTMS does not publish prices; send your slurry details and iron target for a factory quotation by email.
Not sure which model fits? Send 5–10 kg of your material for a free sample test; we deliver the report within 5 days of receiving your sample.
Send us your material. We test it free.
Tell us your material, particle size, capacity and target iron level. We usually reply with a matched model and price within 24 hours.
