Wet magnetic separator

The combined process of gravity and flotation of PTMS magnetic separator is adopted for the ore with "low grade, many species, serious slime of fine particle size, low comprehensive utilization rate and difficulty in effective separation".

PTMS Magnetic Separator

After the raw ore was crushed to -0.60mm, PTMS high frequency vibrating screen and hydrocyclone were used for screening and classification. Two particle sizes of -0.60+ 0.20mm and -0.20+ 0.038mm were roughed by screw PTMS magnetic separator equipment - shaker process, and coarse concentrate was reground. -0.038mm and the overflow of spiral beneficiation equipment adopts the combined process of flotation roughing-centrifuge cleaning. When the raw ore contains 0.31% mineral, The industrial test results of coarse concentrate containing 58.49% mineral at a recovery of 61.93% and fine mud concentrate containing 26.23% mineral at a recovery of 15.02% were obtained through the whole process test, and the total mineral recovery was 76.95%.

what is magnetic separation used for ?

PTMS magnetic separator solves the complex and difficult beneficiation recovery technology problem of uneven distribution of coarse and fine particles.
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com