Magnetic magnetic separator

Concentrate discharge port is realized by magnetic separation column automatic controller of PTMS magnetic separator controlling concentrate discharge valve. First, the automatic controller of automatic/electric button, in manual state, turn the valve to the appropriate location, can open to a half, the above three factors adjusted first, both the magnetic field strength to low-grade, transferred to 6.5 s magnetic field cycle, feed water valve to the overflow point high liquid level from the overflow groove edge, both to the index finger at the edge of the overflow groove, When the water level is just above the index finger.

PTMS magnetic separation

When the overflow concentration reaches the requirements, observe the relative concentration value of the concentrate sensor, and then set the value as baseline 2, generally set between 50 and 60: Watched the overflow concentration sensor, then its benchmark set a value of 1, generally set between 10 to 20, then automatically/electric button is raised, automatic controller into automatic control, automatic regulating valve switch, basic value display value concentration automatic tracking, when tracking less than, also can set the control coefficient, usually set between 35 and 45. PTMS magnetic separator can remove iron (FE2O3) inside.

what is magnetic separation in science？

All parameters are set through the LCD touch screen on the automatic controller panel of PTMS magnetic separator.
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com