Remove iron from lithium iron phosphate

The sintered material is pulverized using an air mill. The working principle of air mill: compressed air is accelerated to supersonic flow through laval nozzle and then shot into the crushing zone to make the material fluidized (air expansion is fluidized bed suspension boiling and collision), so each particle has the same motion state. PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC removal effect is good. In the comminution zone, the accelerated particles smash into each other at the junction of each nozzle.

PTMS magnetic separator

The pulverized materials were transported by updraft to the classification area of PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC after iron removal, and the fine powder meeting the particle size requirement was screened out by the horizontally arranged classification channel, and the coarse powder failing to meet the particle size requirement was returned to the grinding area to continue grinding. Qualified fine powder is collected by high-efficiency cyclone separator along with the airflow, and the dust-containing gas is filtered and purified by the dust collector and then discharged into the atmosphere.

what is magnetic separation method？

PTMS LITHIUM COBALT ACID MATERIAL MAGNETIC removal filter system
LITHIUM COBALT ACID MATERIAL MAGNETIC removal iron filtration system is to filter the iron in the ternary cathode MATERIAL. When the raw MATERIAL enters the main filter net, part of the fine iron filings will be absorbed by the MAGNETIC like ferromagnetism. Through MAGNETIC adsorption of iron, the iron can be filtered. Then through the filter, so that the three positive material force inside the paste is out.
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com