water cooling electromagnetic separator for Kaolin

Hydrothermal method: Feldspar was treated by PTMS magnetic separator and pressurized with KOH solution, so that Feldspar composition was K2O·Al2O3 ·SiO2 ·xH2O zeolite solid phase. K2O is soluble, can be absorbed by plants, and is not easy to lose, is a kind of slow-release fertilizer, at the same time, part of SiO2 also become soluble, become crops fertilizer.

PTMS magnetic separator

Blast furnace smelting: In the production of cement, according to the ratio of limestone 81.4%-82%, Feldspar14.2%-15.6%, iron ore 2.6%-3.2%, fluorite 1.1% and coke 3%, the crushing and PTMS magnetic separator remove iron and mix the ingredients evenly into the furnace. When the furnace temperature is as high as 1 500℃, THE K2O volatilizes and is carried out with high temperature air flow. At the same time, K2O reacts with CO2 in the furnace to produce K2CO3 products, and the slag discharged from the blast furnace is processed into white cement. The method is limited to cement plants or phosphate plants to produce potash fertilizer as a by-product.

what is magnetic separation method for concentration of ore？

Low temperature decomposition method: Feldspar raw materials are crushed to less than 6mm by jaw crusher, and the mineral is crushed to less than 100 mesh by mill. After iron removal by PTMS magnetic separator, the mineral is transported to the pond by belt conveyor and soaked in CaO water for 20min, and then pumped into the heating and pressurizing furnace, in which the temperature is controlled at 100-200 ℃. After a certain period of time, K2SO4 and NaOH industrial raw materials were obtained through crystallization and solid-liquid separation.
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com