magnetic separator conveyor

Feldspar iron removal process is as follows: the production of wet Feldspar is carried out by the process of "raw ore - coarse crushing - medium crushing - pre-screening - grinding - desilding - coarse grain grading - desilding - plate PTMS magnetic separator rough separation - vertical ring high gradient PTMS magnetic separator fine selection - fine grain grading - dehydration". Production process: the forklift will feed the raw ore into the silo, a conveyor is placed at the end of the silo, and the raw ore from the end is evenly fed into the jaw crusher (coarse broken) under the conveyor by the vibration feeder, for preliminary crushing.

PTMS magnetic separation

Then, the produced coarse material is transported by the conveyor to the fine crusher for further crushing. The finely crushed stone is put into the vibrating screen to separate two kinds of stones and stones of different sizes. The stones that meet the size requirements will enter the PTMS Magnetic Separator for sorting. The material under the screen enters the rod mill, and the material out of the rod mill is graded by the cylinder screen, and the material on the screen returns to the rod mill.

what is magnetic separation used for？

Under the screen material into the blocked settling machine and hydraulic classifier classification. The finished products after classification are separated by high field strength plate Magnetic Separator and vertical ring high gradient strong Magnetic Separator PTMS Magnetic Separator. After the removal of iron, the fine sand is dehydrated by the desliming bucket and put into the sand reservoir.
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com