PTMS Magnetic Separator flotation stage adopts single factor sequential method
published date: 2022/9/24
Magnetic separator
After removing the Magnetic materials by PTMS Magnetic Separator, the flotation conditions are successively performed in sections. That is, the bottom flow products under the best conditions in the previous section are transferred to the next section to find the best value of the flotation conditions in this section. The single factor sequential method was used in each flotation stage. According to the results of the single factor sequential test in the flotation stage, the best conditions of each flotation process were selected to carry out the comprehensive flotation process test. The comprehensive flotation test process results show that the flotation refined quartz sand can be obtained after the comprehensive flotation process of the quartz sand after magnetic separation.
PTMS magnetic separation
Introduction to the basic process of quartz sand PTMS Magnetic Separator production line: First, the stone is initially broken by the coarse crusher, and then the coarse material produced is transported by the belt conveyor to the fine crusher for further crushing. The finely crushed stone is fed into the vibrating screen to separate two kinds of stones.
what is magnetic separation process?
The stones that meet the particle size of PTMS Magnetic Separator feed are fed into sand making machine sand, and the other part is fed back into fine broken. The gravel part of the sand making machine is made into sand, which is cleaned by the sand washing machine (optional) and made into finished sand, and the other part is broken again by the sand making machine.
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com
