Permanent magnet magnetic separator

The magnetic block is made of rubidium boron and other materials, which is magnetically stable and not demagnetized. Usually ten years of use will not be demagnetized degaussing phenomenon, but it should be noted that it cannot be used under high temperature conditions, high temperature is easy to demagnetize. The multi-roller PTMS magnetic separator is used to remove impurities such as iron and mica from the ore. With the characteristics of large processing capacity and high recovery rate, it can adapt to the use of different environments.

PTMS magnetic separator

 
Quartz sand PTMS magnetic separator, is a high-strength magnetic magnetic separation equipment, can be produced in the process of quartz sand in the process of iron and fe2O3 clean, quartz sand has a particularly high requirement for iron, only under the action of strong magnetic, in order to clean the magnetic substances in quartz sand. The magnetic field of the equipment is up to more than 13,500 Gauss, which can remove the iron contained in the quartz sand ore and improve the quality of quartz sand.

what is magnetic separation process？

 
Wet PTMS magnetic separator can reduce the fineness of grinding to a certain extent, so as to better achieve the monomer dissociation of iron minerals. However, it should be noted that in the case of too fine grinding, the slurry concentration is too low and the slurry flow rate is too fast, which makes iron minerals enter the quartz sand concentrate.
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com