magnetic separator factory

The mechanical scrubbing efficiency of PTMS magnetic separator increases with the increase of pulp concentration, because the probability of inter-particle collision increases with the increase of pulp concentration. The results show that the cleaning concentration of placer is better between 50% and 60%. The cleaning time is based on the initial product quality requirements in principle, and should not be too long. Because the time is too long, it will increase equipment wear, increase energy consumption, and lead to an increase in the cost of mineral processing purification.

PTMS magnetic separation

 
Strong scrubbing with ointment, combined with the appropriate process and PTMS magnetic separator equipment, the use of powder column friction can increase the electrical repulsion on the surface of impurity minerals and quartz particles, and strengthen the separation between impurity minerals and quartz particles. In the rod abrasion test between raw ore and quartz sand larger than 0.3mm, Fe2O3 decreases from 0.19% to 0.10%, and the iron removal rate is 47.4%.

what is magnetic separation method？

Compared with other iron removal processes, PTMS magnetic separator process has the following characteristics: 1) the product quality is good, which can meet the quality requirements of float glass for high-quality silica sand; 2) Large output. At present, some small-scale production and processing enterprises use this method to remove iron more, because it is low cost and simple to operate, but the iron removal rate is relatively low.
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com