water cooling electromagnetic separator for Kaolin

Ultrasonic PTMS magnetic separator Iron removal method is the use of ultrasonic technology to remove the secondary film iron on the surface of quartz particles, generally ultrasonic treatment for about 10 minutes, the iron removal rate can reach 46% ~ 70%, in the use of ultrasonic iron removal, should pay attention to the timely removal of waste liquid to prevent secondary adhesion and reduce the effect of iron removal. For iron removal of quartz sand, the ultrasonic method is relatively expensive, but it can be used for those areas that require high purity and low dosage of quartz sand.

PTMS magnetic separator

 
Microbial PTMS magnetic separator Iron removal process is the use of microbial leaching of quartz sand particles on the surface of thin film iron or impregnated iron, in order to obtain good quartz sand concentrate, the process is a new technology, is still in the experimental stage. On the surface of the study, the iron oxide on the quartz surface can be removed by Aspergillus Niger, penicillium, Trichomonas piriformis, pseudomonas, bacilli, Bacillus polymyxus, micrococcus lactate and other microorganisms.

what is magnetic separation？

 
The common high purity quartz sand PTMS magnetic separator iron removal production process method, in the actual concentrator, can not be blindly selected, should be determined according to the impurities contained in the quartz sand, so we suggest that the first beneficiation test, through the experimental analysis, design and customize the suitable quartz sand production process plan.
Contact: DELLA
Mob: +86-13929907491
sales@powtechina.com